PZEM-051 DC 6.5-100V 100A 4 IN1 Voltage Current Power Energy Digital Voltage Meter w/ 100A Shunt

$24.99  $16.95
Save: 32.17% off

  • Model: PZEM-051-100AS
  • Manufactured by: ROXDV

Always Free Shipping

Add to Cart:

Package contents

  • 1x DC 6.5-100V 100A 4 IN1 digital energy meter
  • 1x 100A/75mv shunt

Specification parameters

  • Working voltage: 6.5~100VDC
  • Test voltage: 6.5~100VDC
  • Rated power: 100A/10000W
  • Measurement accuracy: 1.0 grade

Function

  • Electrical parameter measurement function (voltage, current, active power, energy)
  • Voltage alarm function (over voltage alarm threshold, backlight and voltage flashing to alarm)
  • The reset function of energy key
  • Store data when power off
  • Large-screen LCD (display voltage, current, active power, energy at the same time)

Display format

Power: test range 0~10kW

  • within 1KW, the display format is 0.0~999.9W
  • 1KW and above, the display format is 1000~9999W

Energy: test range 0~9999kWh

  • Within 10KWh, the display format is 0~9999Wh
  • 10kWh and above, the display format is 10~9999kWh

Voltage: test range 6.5~100V

  • Display format: 6.50~99.99V

Current: test range 0~100A

  • Display format: 0.00~99.99

Backlight control

  • Short press the key to turn on or off the backlight, the backlight has memory function, it can store the on or off state when power off

Reset energy

  • Step 1: Long press the key until the power display area display “CLr”, then release the key
  • Step 2: Short press the key, the energy value will be cleared and exit the reset flashing state
  • Step 3: If there is no operation within 5 seconds, it means the energy value is not cleared and will exit the reset state

Set voltage alarm threshold

  • Step1: Long press the key until the power display area display “SET”, then release the key
  • Step2: After enter this state,
    • the voltage area display the current high voltage alarm value
    • the current area display the current low voltage alarm value
    • and the last digit begin to flash, then you can short press plus 1
    • when there is no operation over 3 seconds, it will switch the digit position automatically
    • from the high voltage alarm value to the low voltage alarm value, there are total six digits
    • the range of the voltage alarm threshold is 6.5
  • Step3: After finish the setting, long press the key until the screen display “PASS”, your setting is done successfully and it will exit the setting state automatically

Precautions

  • This module is suitable for indoor, please do not use outdoor
  • Applied load should not exceed the rated voltage, current
  • Wiring order can’t be wrong

Item specifics

  • Dimensions:   8.96cm*4.96cm
  • Accuracy Class:   1.0
  • Operating Temperature:   -10-60 degree
  • Power Supply:   DC
  • Display Type:   Digital Only
  • DIY Supplies:   Electrical
  • Model Number:   PZEM-051/100A
  • Measuring Range:   0-100A

 

Connect with

 
Your IP Address is: 54.234.13.175

This site chose Symantec SSL for secure e-commerce and confidential communications

Copyright © 2002-2018 Roxsat Eyeondvr New Jersey USA. All Rights Reserved.
ROXSAT is not responsible for any errors, omissions or inaccuracies in the material provided on this site. All prices are subject to change without notice.