AC Multifunction Voltmeter Meter  AC 80-260/100A Volt Amp power tester

$14.99

Always Free Shipping
Add to Cart:

  • Model: PZEM-061
  • Manufactured by: ROXDV





 

AC Multi function meter energy power monitor AC 80-260/100A Volt Amp power energy tester with Current Transformer 110v 220v

AC Multifunction Voltmeter Meter  AC 80-260/100A Volt Amp power tester Voltmeter Ammeter Current Transformer 

Energy Power Monitor

 

A. Function

  • Voltage, current, power, energy
  • Overload alarm function (over power alarm threshold, the backlight and power flicker tips).
  • The power alarm threshold preset function (can set up their own power alarm threshold).
  • The power button clear function.
  • Power-down data storage function.
  • Large-screen LCD screen full display function (display voltage, current, active power, power).
  • Backlight.

Display

Display Interface

  • Displayed by the large-screen LCD screen at the same time voltage, current, power, power parameters, as shown in FIG

Display Format

  • Power: measurement range 0 ~ 22kW
  • 1kW display format within 0.0 ~ 999.9W
  • From 1kW display format 1000 ~ 9999W
  • 10kW above the display format 10.0 ~ 22.0kW
  • Power: measurement range 0 ~ 9999kWh
  • 10kWh within the display format 0 ~ 9999Wh
  • Above 10kWh display format 10 ~ 9999kWh

Voltage

  • Test Range 80 ~ 260V
  • Display Format 80 ~ 220V

4. Current

  • Test Range 0 ~ 100A
  • Display Format 0.00 ~ 99.99A.

Button

The backlight control

  • By short press the button to turn on or off the backlight, the backlight status store automatically 

Clear The power 

  • Press the power button 5 seconds until the digital display window flashes, then release the button
  • If you press the button again, the consumption data will be cleared and stop flashing
  • If you hold the button for 5 seconds until no flashing, the charge data will be cleared. 

3. The power to set the alarm value

  • Press the button, when the LCD screen display "SET CLr" after the release button, set the value into the power status report
  • Power area displays the current value of the power alarm, when lowest digit starts to be blinking, then you can press the button of the digital +1, when there is no key operation more than three seconds, short digital set as above automatically
  • After setting, press the button more than five seconds to save automatically and exit, the scope of active power threshold set for the 0.0 ~ 22.0kW

 Notes

  • This module is suitable for indoor, not for outdoor use
  • Applied load can not exceed the rated power
  • The wiring order must be correct to avoid any circuit burns

Specifications

  • Working voltage: 80 ~ 260VAC
  • Test voltage: 80 ~ 260VAC
  • Rated power: 100A / 22000W
  • Working Frequency: 45-65Hz
  • Measurement accuracy: 1.0

upc 780456278726


Add to Cart:

  • Model: PZEM-061
  • Manufactured by: ROXDV